This video shows you how to combine TV aerial, satellite, FM and DAB radio signals onto the same coaxial cable using a diplexers, triplexers and quadplexers.

This is perfect for when you do not have the facility to install separate cables for each of the services or if you want to minimise the amount of cables throughout your property. As all of the services use different frequencies they can easily be combined onto one cable without interfering with one and another.

Please note that this process CANNOT be used with Sky Q or any other satellite TV service that uses a wideband LNB or any satellite service that does not use the satellite IF band. Sky+HD and Freesat will work fine with this equipment.

Once you have combined all of the signals onto a single coaxial cable you will also need to separate them at the TV end. This can be done by using the same type of combiner installed in reverse so that in the signal inputs become the output, or with the installation of a diplexed, triplexed or quadplexed wallplate socket.

For more videos showing the installation of different TV aerial and satellite wall plates please see the DIY video demonstrations below.

Satellite F type wall plate:
[ Ссылка ]

TV Aerial wall plate:
[ Ссылка ]

свернуть