DISCLAIMER:
A “star” next to the product denotes an affiliate link. If you buy from the affiliate store using this link, I may get a small commission on the sale. Thank you for your continued support
This is a video to show you two ways to connect a #ReverseCamera into your existing #Android #Headunit. The typical way others do is to feed the camera with 12v signal coming from the car’s reverse tail light. But my preferred way is to connect one end of the red wire coming out of the RCA video connector into the “Reverse” trigger on the headunit as a means to power up the reverse camera. There is no messing around with light bulbs that may cause a CANBUS error.
🙏 Support my channel: [ Ссылка ]
🔘 PRODUCTS FEATURED IN THIS VIDEO:
⭐️ Number Plate Light Reverse Camera for C200K W203 ([ Ссылка ])
⭐️ Android Headunit for MB C200K W203
OPTION 1: 8” Screen w/ built-in wired ACP and AA ([ Ссылка ])
OPTION 2: 7” Screen w/ built-in wireless ACP and wired AA ([ Ссылка ]
🛠 TOOLS OF THE TRADE:
⭐️ Digital Multimeter - This is an essential tool if you need to troubleshoot wiring issues
Amazon - [ Ссылка ]
AliExpress - [ Ссылка ]
⭐️ SmallRig Professional Phone Video Rig Kit - This is a step up from my old set which was made of poor quality plastic and it kinda needs replacing. This kit is more stable and has loads of attachments. I find the power bank holder very useful especially during those extended recording sessions.
Ebay - [ Ссылка ]
⭐️ Engineer Crimping Tool This is a simple yet very effective tool to use for crimping those small JST/Molex connector pins (20-32 AWG Wires). It makes DIY installs look clean and legit.
Amazon - [ Ссылка ]
⭐️ Ratchet & Torx 38-pc Set ([ Ссылка ])
A good and inexpensive beginner ratchet set. A must have for any automative DIY’er
