This is my first time working with acrylic. I found it helpful to move the acrylic around while applying the weld-on 4. It seemed to help it fully bond without air pockets. Granted there are a couple tiny bubbles. I had to apply a lot more liquid then I anticipated. Hopefully this helps someone.
This is a 350 gallon tank. I'm adding 1"x1"x12" acrylic strips to the inside seams. It may not be clear in the video but I am sitting inside the tank.
![](https://s2.save4k.ru/pic/INafAuAsVGs/maxresdefault.jpg)