Buy Now!
New Shock Absorber Set from 1AAuto.com [ Ссылка ]
This video shows you how to install shock absorbers on your 1999-2006 Chevrolet Silverado 1500. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This repair was done on a 2004 Chevrolet Silverado 1500 Base 4.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• 21mm wrench
• 13mm Socket [ Ссылка ]
• 21mm Socket
• Air Compressor
• Torque Wrench [ Ссылка ]
• 1/4 Inch Drill Bit
• 5/16 Inch Drill Bit
• Stepper Bit
• Gloves [ Ссылка ]
• Safety Glasses
• Wire Ties
• Center Punch [ Ссылка ]
• Floor Jack [ Ссылка ]
• Pole Jack
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
