Welcome to subscribe to the channel: [ Ссылка ]
Email:
Anna@yikegroup.net
Web: www.yikegroup.net
Wechat/whatsapp: 008613363699514
Anna Tang YIKE GROUP
7 ply automatic corrugated cardboard line
7 ply automatic corrugated cardboard production line for corrugated cardboard manufacturing
hydraulic shaftless mill roll stand(heavy type)
※structural feature:
★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
★brake adjustable adopts multipoint braking system.
★every stand matched two sets paper car , and they can paper on the both sides at the same time.
★ tooth jammed with dual-stage head and jammed the first three \ four inches dual-stage.
High-speed automatic splicers
★ Maximum diameter of base paper: 1500mm.
★ Mill roll stand with automatic tension control, high-speed paper receiving success rate.
★ Paperless tail then the paper, to reduce the paper loss(Paper tape and only partially overlap with a width of 40mm.)
★ When the paper car out, automatic transfer out,and the vacuum suction,easy paper loading, automatic tension control,zero error of paper receiving.
★ All PLC automatic control, accurate, less failure, easy maintenance.
★ The first buffer wheel pull the paper, automatic alignment, easy to pull paper.
★ Machine superiority, cylinder control of the paper machine at high speed, the paper will not appear in the ordinary motor control of broken tiles, aming phenomenon.
Multi-cassette positive pressure single facer
※structural feature:
★design speed:250m/min.
★effective width:2200mm.
★main corrugating roller:¢405mm(According flute differ),pressure roller¢495mm,preheat roller¢420mm.
★using negative pressure design, lower heat consumption, helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, because the pressure evenly, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.
★quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading,put into the machine,and air pressure system will lock it,fixed to the machine base,only need a few buttons can complete the replacement quickly and easily.
★corrugated roller adopt50CRMO high quality alloy steel, dealing with heat,after grinding tungsten carbide surface treatment. the surface hardness of HV1200 degrees above.
★corrugated roller, pressure roller adopt airbag control system having high stability, having the barometric pressure control buffering effect at the same time.
★Glue volume control with electric adjustment,rubber septum electric device,the glue system can operate independently when the motor stops,prevent glue exhausted.
★the moveable type glue unit is convenient to clean and maintain.
★easy operation control system, touch screen operation interface,Drawing with color display operating status, function selection, fault indication, and parameter settings, etc. can exclude exhibit this machine fully functional, easy to operate, user-friendly.
★built-in pre-conditioner with proportional spraying device, adjustment the core paper temperature and moisture.
★main, vice corrugating and pressure roller bearings are used in high-temperature grease to ensure bearing life running smoothly.
SM-E2 double facer
※Structural features:
★surface of hot plate is dealed with grinding, hot plate width600mm,in total 20 pieces hot plate.
Hot plate is made adopt container board, complies with the national first-class pressure vessel standard,
enclosed pressure container certificate and inspection certificate.
★hot plate using the whole hot plate structure. Platen lifting pneumatic spring-type structure.
★upper and lower belt around the correction to adjust the use of automatic adjustment on both sides, on the
conveyor belt pneumatic tensioning system 1 set.
★ piping thermal heating plate temperature control points four sections with temperature display.
★cotton belt on the use of double-cylinder S-type cotton belt tensioning device.
★ Lower belt pneumatic pneumatic corrective tensioning mechanism, the structure is simple and practical,
with a manual fine-tuning a set.
★Electrical components used internationally renowned brands, the device stable and reliable operation.
★Main drive motor for the motor frequency energy, low-speed torque, wide speed range, reliable, easy maintenance.
★ hot plate internal partitions for the isolation structure, the steam was S-shaped flow, steam, water separation function is obvious, improving steam utilization.
★The main backbone of high intensity profiles GB, solid structure, beautiful appearance, suitable for high speed working.
![](https://s2.save4k.ru/pic/IhoaDJKJ6eQ/mqdefault.jpg)