In today's tutorial, we'll walk you through the step-by-step process of programming a Gliderol TM305C remote with a Glidermatic GRD roller door opener. Whether you've just bought a new remote or you're needing to delete an old one, this guide will help you get set up in no time.

Steps:
Locate the Control Box: Locate the Glidermatic GRD control box. This is typically located on the garage wall near the top of the garage door Opening.

Open the Control Box: Gently open the control box cover to reveal the internal buttons.

Enter Programming Mode: Locate the 'Learn' or 'Program' button inside the control box. Press and hold this button The indicator light will begin to flash, signaling that the opener is in programming mode.

Program the Remote: While the indicator light is flashing, press the button on your Gliderol TM305C remote that you wish to program. Hold it down until the indicator light on the opener illuminates steadily and then goes out. This means the remote has been successfully programmed.

Exit Programming Mode: Close the control box cover.

Test the Remote: To ensure that the programming was successful, press the programmed button on the remote. The roller door should respond accordingly.

Deleting the Gliderol TM305C Remote:
Hold the Learn button for 15 Seconds. Then pres the button of the remote you would like to delete. The remote has now been erased.

And that's it! You've successfully programmed your Gliderol TM305C remote with the Glidermatic GRD roller door opener. For more tutorials and tips on remotes and openers, make sure to subscribe to the Kode Remotes Channel. If you found this guide helpful, please give it a thumbs up and leave any questions or feedback in the comments below. Happy programming! 

Note: Always ensure safety first. Make sure the area around the roller door is clear before testing the remote. If you encounter any issues or complications, it may be a good idea to consult the user manual or reach out to a professional technician for assistance.

свернуть