Adding Air to Tires using Jeep's Tire Inflation Kit:
Step-by-Step Guide
1) Find the Tire inflator kit in the rear of the vehicle
2) Uncoil the power coil
3) Locate the power outlet in your vehicle which can be located in the front or the back of the vehicle.
4) Attach your hose to the tire
5) Check your selector knob to make sure you have the appropriate selection for inflation or sealant.
6) Power on the vehicle
7) Turn on the tire inflator kit power switch
8) Let the tire inflator kit run for 5 - 7 minutes
9) Monitor air pressure to make sure you do not overinflate (check your owners manual for the specific PSI)
10) When you reach the manufacturer's recommended PSI turn off the tire inflator kit and pack it back into the vehicle.
11) Drive your vehicle for 5- 7 miles or approximately 10 minutes to make sure the sealant fully coats the inside of the tire.
12) Once you have completed the above check your tire pressure to make sure it is at the appropriate PSI level recommended by the manufacturer.
About the Jeep Inflator Kit:
Jeep's tire inflator kit is a compact and portable solution for inflating a flat tire or a tire with low air pressure. It is typically included as standard equipment with Jeep vehicles and is designed to provide drivers with a quick and easy way to inflate and repair a flat tire, without the need for a spare tire.
The kit consists of a small air compressor that plugs into the vehicle's 12-volt power outlet, a sealant solution, and a tire pressure gauge. To use the kit, the driver simply attaches the air compressor to the tire valve stem and inflates the tire to the recommended pressure. The sealant solution is then injected into the tire to seal small punctures or leaks, allowing the driver to continue driving until the tire can be replaced or repaired.
The advantages of Jeep's tire inflator kit include its small and lightweight design, which makes it easy to store in the vehicle's cargo area or trunk. It is also a convenient solution for drivers who prefer not to carry a spare tire, as it eliminates the need for a bulky spare tire and tire jack. The kit can be used in emergency situations to quickly inflate and repair a flat tire, allowing the driver to continue driving safely until the tire can be repaired or replaced.
However, it's important to note that the tire inflator kit is only intended as a temporary solution and should not be used to repair large punctures or damage to the tire sidewall. It's important to follow the instructions provided with the kit carefully and to consult with a professional mechanic if the tire damage is significant. Additionally, some Jeep models may come equipped with a full-size spare tire as an option, in addition to the tire inflator kit.
Ещё видео!