Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com [ Ссылка ]
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. This video shows you how to install a new quality TRQ driver side lower control arm in your 2007-14 Ford Edge.
• Check here for more videos on the 2007-14 Ford Edge: [ Ссылка ]
This process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge
Tools you will need:
• Pry Bar [ Ссылка ]
• 13mm Wrench [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• Blowtorch
• Locking Pliers [ Ссылка ]
• Side Cutters
• 1/2 Inch Air Impact Gun [ Ссылка ]
• Air Chisel [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Cotter Pin
• Rust Penetrant
• Hammer [ Ссылка ]
• Rubber Mallet [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Ещё видео!