FreeCAD 5 simple 3D models, part 32
Welcome to the channel Miri tech workshop.
My name is Miro in this video there is an accelerated recording of the modeling of five 3D models. During the entire process in FreeCAD, I primarily used Part Design and Sketcher. Some models may have been created using incorrect procedures, but some tips may inspire you. If you have ideas or constructive criticism, please share them in the comments. Have a nice day :)
1.
In today's video I will show you in software FreeCAD version 0.21.1. how to 3D model Let's choose Part design, Create body, Create sketch. We will choose a working plane. Create rectangle and I chose the starting point in the middle so that all symmetrical operations are done as easily as possible. I deleted one side of the creature and using Create polyline I drew a shape on one side
2.
In this video I drew a model similar to a nail. At the beginning of "Part design" and the new "Sketch" I drew half of the model and as if cut through the middle. I entered the necessary dimensions so that there are no degrees of freedom. And I used the "Revolution" function.
3.
In this video, I modeled a cylinder with a creature hole where one side was larger and the other smaller. in "Part design" I created a new sketch and drew a circle on which I entered the dimensions. Using the "Pad" function, I created a 3D body - a cylinder. I marked one side and created a new sketch and drew the creature on it
4.
In today's video I will show you in software FreeCAD version 0.21.1. how to 3D model In "Part design" and a new sketch, I drew 2 circles and created a 3D object using the "Pad" function. I marked the surface by clicking on the bowl and created a new sketch on it. keys m. After entering the dimensions, I removed this hole with the "Pocket" function and used the "Polar pattern" to create stripes around the center hole at equal intervals
5.
For this part I mainly used "Part design" and "Sketch" I drew 2 circles and thus got symmetrical intercircles I used "Pat" to create 3D from this sketch. I viewed the planes by clicking on "Origin" on the right side and by pressing "Space" I selected the plane and "Create circle" I entered the dimensions and via the "Pocket" function I removed the material
1. 3D model. 00:00
2. 3D model. 02:33
3. 3D model. 04:33
4. 3D model. 06:17
5. 3D model. 09:16
Vitajte na kanáli Miri tech workshop. Moje meno je Miro v tomto videu je zrychleny zaznam z modelovania piatich 3D modelov. Počas celého procesu vo FreeCAD som primárne využíval Part Design a Sketcher. Niektoré modely mohli byť vytvorené pomocou nesprávnych postupov ale niektore tipy vas mozu inspirovat. Ak máte nápady alebo konštruktívnu kritiku, podeľte sa o ne v komentároch.
Prajem pekny den :)
#freecad #partdesign #3dmodeling #sketch
FreeCAD 5 simple 3D models, part 32
Теги
3D models3D modeling5 simple parts5 partsfast paced videovideo tutorial5 tipsmirimiritechworkshoptechfreecadtechworkshop2024miri tech workshopfreecad softwarehow to freecadhow to constrainfreecad drawingFreeCAD 3D modeling tutorialFreeCAD 0.21.1 tutorialFreeCAD Part design tutorial3D modeling with FreeCADFreeCAD software tutorialFreeCAD modeling techniquesFreeCAD 0.21.1 demonstrationFreeCAD modeling tips