MSI Kombustor Tutorial for Stable GPU Overclock Tuning .
Artifact Scan can detect pixel problems while overclocking memory or/and gpu.
If Artifact Scan detect problems (Right Down Corner not 0 / 0), your GPU or GC (Graphic Card) Memory (VRam) is unstable on this frequency, doing mistakes.
Artifact Scan Problem do like sample
3424324/6767565
or
5345235234/2132133
Step by step overclocking is secure 50 mhz step kombustor test 50 mhz step kombustor test ....
If you dont know your GPU Limits and gpu cooler performance.
5 Important thing under artifact scan:
1.Watch GPU Usage need to be maximum (close or egal with 100%)
Some drivers only use gpu 50% under MSI Kombustor, so its problem, because you under gaming has 100% gpu usage.
Best is 99-100% Gpu usage (Some drivers and Windows version can)
Good is 95% or more.
2.Separate Overclock the Vram and the GPU
Dont overclock and test both in the same time, because u dont know which one will Artifact, erroring vram or gpu.
GPU:
So OVerclock gpu, test with kombustor (while no errors, search the best frequency).
Vram:
STock down gpu and Overclock vram test with kombustor. you need high resolution or vram memory tester style like (GL)Furmark-Donut-6500MB (while no errors, search the best frequency).
BOTH:
OVerclock both (gpu and vram too) and test with kombustor (while no errors,use the best frequency).
"BTW, i think DDR5 or GDDR5 videocards dont need memory overclock. Not will faster.
3.Watch Video Memory usage to higher, in this video 400-500 mb, for better VRAM artifact scan.
Increase the Kombustor test resolution for higher VRAM usage.
4. Watch Out GPU temperature, if its too high, doing artifacts. Good is 50-60 Celsius, Bad is 65 or more Celsius
5. Run the artifact scan more than 10 minutes (minimum)!!! If its not doing mistake(s) under this time, your GPU is stable overclocked.
Ещё видео!