#kawasaki #1000sx #installation #tutorial
Installation video for the Kawasaki OEM Heated Grips for the 2020-2023 Ninja 1000SX. Part Number: 99994-1412
[ Ссылка ] (RevZilla)
If you have 2017-2019 models you want part 99994-0863. Be advised the install will be similar but slightly different connector, etc
[ Ссылка ]
Installation is similar for older models with a few differences and part numbers.
You will want to remove your:
Middle Fairings: [ Ссылка ]
Side Covers: [ Ссылка ]
Lower Fairings: [ Ссылка ]
You will want to get an adhesive, preferably a grip adhesive made for high temp applications. I recommend E6000 which can be found on Amazon by following my site link: [ Ссылка ]
------ In This Video ------
00:00 - Introduction
00:20 - What you will need
02:11 - Unboxing
04:28 - Before you get started
05:41 - Remove left handle bar weight
06:26 - Remove left hand grip
07:07 - Remove right handle bar weight
08:08 - Clean and install left grip
13:57 - Run left grip wires
16:26 - Remove throttle grip assembly
17:55 - Install heated throttle grip assembly
20:08 - Run throttle grip wires
23:27 - Install heated grip controller
25:07 - Run controller wires
30:17 - Reinstall weights
32:05 - Post install checks and testing
I've started a blog, though it is in its infancy right now, check it out: [ Ссылка ]
For all the equipment, accessories, gear I use, plus recommended books and more, check out my useful products list:
[ Ссылка ]
![](https://i.ytimg.com/vi/K6F4jntVOoU/maxresdefault.jpg)