This video shows you how to remove the stock OEM quick release adapter propeller mount from the DJI Inspire 2 motor and install the XOAR Precision Pair Carbon Fiber Propeller PJP-T-L-IN2.
DJI has put threadlocker on the screws which makes it difficult to remove the stock quick release adapters from the motors, use the trick in this video to remove them safely from DJI Inspire 2 without damaging the motors. This video also shows you how to properly install the XOAR self-tightening adapters as well.
How to Install XOAR Props on DJI Inspire 2:
1) These XOAR Props can be mounted on DJI Inspire 2 using XOAR Self-Tightening adapters or directly on DJI Inspire 2's motors. First, please remove DJI Inspire 2's original adapters.
2) Self-Tightening adapters have two sets of mounting holes distance of 12mm and 13mm. Use the set of 13mm to mount the cup on DJI's motors.
3) The arrow on the self tightening adapter should be pointing to the direction of propeller rotation.
4) Short screws are used to connect the bottom part of the self tightening adapter to the brushless motor using 13mm set of side holes.
5) Longer screws are used to mount the propellers to the top part of the self tightening adapters using the 13mm set of side holes.
6) Please confirm the propellers are rotating in the same direction as the brushless motors before flight. (Leading edge is facing the same direction of motor’s rotation)
XOAR Precision Pair Carbon Fiber Props for DJI Inspire 2: [ Ссылка ]
Ещё видео!