How to Wire Wrap a simple loop using a ball pin to create an earring. My hack is to draw a line on the chain nose (flat) pliers so that I can get a consistent length on each of my wire wraps. This is especially important for earrings! By bending the head pin over the chain nose pliers, I mark the length of the neck and the beginning of the loop. Then I switch to round nose pliers to help give me a consistent round loop (you should consider marking these pliers, too). After the loops is done, I slowly work a tight spiral around the neck and trim at the base. Feel free to experiment with longer head pins to give more wraps on the top of the bead. It is a matter of preference.
