Learn more about the SSH™ MultiPro vs. SSR™ MultiPro Jr. here: [ Ссылка ]
SSR™ MultiPro Jr. manual: [ Ссылка ]
New Tech Machinery's SSR™ MultiPro Jr playlist - [ Ссылка ]
Learn more about our products here: [ Ссылка ]
How do you change an SSR™ MultiPro Jr. profile?
**********************************
Tim LaGuardia, Assistant Service Manager at New Tech Machinery, demonstrates how to do a profile changeover on an SSR™ MultiPro Jr. This instructional video focuses on safety first, showing how to properly lock out and tag out the machine before starting. Tim guides you through the entire process, including the tools you'll need, removing the old profile, and installing a new one, like the FF100 profile. He provides detailed steps for aligning the machine with the new profile, setting shear dies, and making test cuts to ensure everything is aligned correctly. This video is a must-watch for anyone looking to safely and effectively change profiles on their SSR Machine. For more helpful tips and videos, visit NewTechMachinery.com or our YouTube channel, and reach out to their service department for any further questions
In this video:
0:00 - Teaser
0:15 - Intro
0:26 - Safety first
1:02 - Tools you will need
1:20 - Remove the old profile
2:55 - Remove shear dies
3:51 - Set the C dimension on the right side entry guide
4:36 - Set the left side guide to your material
5:19 - Install the right-side tooling of your new profile
6:57 - Set the A dimension on your right-side tooling
7:44 - Align R1
8:24 - Align R2
9:06 - Align R3
9:34 - Install left-side tooling
10:16 - Set the B dimension on your left-side tooling and align L1
10:58 - Align L2
11:21 - Align L3
11:38 - Load machine with material
12:45 - Install shear dies
15:21 - Test cut and check blade alignment
16:50 - Run material out
17:24 - Learn more in the links below
17:35 - Outro
Interested in learning more about a machine? Contact us here: [ Ссылка ]
**********************************
FOLLOW THE NEW TECH MACHINERY TEAM
►[ Ссылка ]
►[ Ссылка ]
►[ Ссылка ]
Visit Our Website: [ Ссылка ]
Subscribe To Our Blog: [ Ссылка ]
Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury.
New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.
Ещё видео!