First Start Up of Harbor Freight Predator 4000 Generator. Here you get to see the start up of a newly acquired Harbor Freight Predator 4000 Watt Generator.

After unpacking from carton and checking for damages or missing parts: I filled the crank case with motor oil up to the FULL Mark, checked the spark plug gap, moistened the foam air filter with a few drops of motor oil and finally installed the Optional HF Wheel Kit.

Getting generator ready to START and RUN: Add a small amount of Regular 87 Octane gasoline in the fuel tank, move the Choke Lever to the START Position, move the Fuel Shut Off Valve to the ON Position, place the ON/OFF switch to the ON Position, grab the Pull Cord Handle firmly and pickup any slack then give the Pull Cord a swift but steady pull (DO NOT jerk the Pull Handle if you want to save your back and your Starter Mechanism).

Are these generators as good as the Customer Reviews say they are? So far, so good. Evan after a few years (now 2019) still going strong. Below are some items that you may find useful and not always available at your local Harbor Freight.

Optional 8-inch Wheel and Folding Handle Kit for Predator Generators:
[ Ссылка ]

Replacement Carburetor for 4000W Predator Generators:
[ Ссылка ]

Replacement Air Filter Set for 4000W Predator Generators:
[ Ссылка ]

STA-BIL Fuel Stabilizer 4 oz:
[ Ссылка ]

Predator 4000 Generator Owner's Manual:
[ Ссылка ]

свернуть