FRD010D (2000-2011 Ford Focus)
Programming Instructions for your Duracell Keyless Entry Remote:
Step 1: Fasten the driver's seatbelt and close all doors.
Step 2: Insert the key into the ignition and turn from “Off” position to “Run” position 4 times within 6 seconds ending in the “Run” position.
Step 3: Turn the ignition to the “Off” position. You will now hear an acoustic signal indicating that the vehicle has entered programming mode.
Step 4: Within 10 seconds press and hold any button on the first keyless remote to be programmed. Wait for the acoustic signal and the warning lamp on the dashboard to flash. Then release the button on the remote. Wait at least 2 seconds but no more than 10 seconds to repeat this step for any remaining remotes to be programmed.
Step 5: Turn the ignition to the “Run” position or wait 10 seconds to exit programming mode.
Your Duracell Keyless Entry Remote is now programmed!
Vehicle Compatibility:
2000-2011 Ford Focus
