Buy Now!
New Brake Rotor Backing Plate from 1AAuto.com [ Ссылка ]
This video shows you how to install new rear brake rotor backing plates from TRQ on your 2003-2009 Dodge Ram 2500.
This repair was done on a 2008 Dodge Ram 2500 SLT 5.7L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2003 Dodge Ram 2500
2004 Dodge Ram 2500
2005 Dodge Ram 2500
2006 Dodge Ram 2500
2007 Dodge Ram 2500
2008 Dodge Ram 2500
2009 Dodge Ram 2500
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 24mm Wrench
• 21mm Socket
• 24mm Socket
• Air Blow Gun
• Brake Caliper Hanger [ Ссылка ]
• Locking Pliers [ Ссылка ]
• 9/16 Inch Socket [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Block of Wood
• Brake Parts Cleaner
• Cloth Rags [ Ссылка ]
• Copper Anti-Seize
• Gloves [ Ссылка ]
• Liquid Thread Locker
• RTV
• Safety Glasses
• sanding disc
• Silicone Brake Parts Lubricant
• Bucket
• Chisel [ Ссылка ]
• Hammer
• Large C-Clamp
• Magnet - Extendable
• Pick [ Ссылка ]
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
