Buy Now!
New Engine Water Pump from 1AAuto.com [ Ссылка ]
This video shows you how to install a new engine water pump from TRQ on your 2010-2013 Kia Forte Koup (2.4L L4). The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
Estimated installation time for a professional technician is approximately: 1 hour 54 minutes
This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Kia Forte Koup
2011 Kia Forte Koup
2012 Kia Forte Koup
2013 Kia Forte Koup
Tools you will need:
• Pocket Screwdriver
• Pry Bar [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• Coolant Funnel Set
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Gloves [ Ссылка ]
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Ещё видео!