Part 2 - AmScope Trinocular Microscope follow-up mods & more Bulova watchmaking action!

Watch Part 1 here: [ Ссылка ]

In this follow up video I show how to increase the work distance between the microscope and your subject, and tackle a nasty audio hum problem caused by the microscope camera. I also show how to: color-balance an LED ring light, make your microscope easy to move around your workspace and silence the rattling coming from the eyepieces.

Once the microscope setup is perfect, I return to the Bulova watch movement I started working on in video 1, and completely disassemble it under the scope!

Here's the microscope, adaptors and accessories I needed to assemble my watchmaking/video recording microscope setup... (my Amazon Associate links):

AmScope SM-4TPZ Trinocular Zoom Microscope - This stereo microscope has the perfect range for jewelry and watchmaking.
[ Ссылка ]

HAYEAR 1/1.8 inch IMX334 Sensor 4K Camera - 4K UHD output, and one of the only microscope cameras I found with a microphone input so you can sync to your other video...
[ Ссылка ]

0.35X CTV Microscope Camera Adapter (You'll need this to focus the trinocular port onto the camera sensor)
[ Ссылка ]

5mm C to CS lens adaptor - 5pc. (You'll need one of these 5mm spacers to fix the focal length of the camera to the microscope port)
[ Ссылка ]

Microscope 144 Led Ring Light (Inexpensive light that is basically the same as the one Amscope sells for more money)
[ Ссылка ]

Color Correction Gel Light Filter
[ Ссылка ]
Kitchen Appliance Sliding Tray
[ Ссылка ]

00:00 What's covered in this video
04:47 A note on ergonomics and health
05:43 Troubleshooting noisy audio over HDMI
08:26 Increasing working distance with a Barlow lens
13:28 Color-balancing an LED ring light
16:35 Fixing the rattling eyepieces
19:57 Bulova 6BL movement disassembly
20:33 Oil access points on the back...
23:00 Removing the pallet fork
24:01 Crown wheel, ratchet wheel & click
28:09 Train wheel bridge & barrel bridge
31:28 removing the power train wheels
33:38 removing barrel complete w/ mainspring
33:56 Disassembling the keyless works
37:40 Removing the cap jewels
41:24 Unwinding the mainspring
45:37 Conclusion - please leave your comments!

#watchrepair #4Kvideo #watchwithmike

свернуть