This video details the New SoarKraft Wing with the MH32 Airfoil
Print files and instructions available from [ Ссылка ]
Welcome and thanks for watching
Please Like, Subscribe and comment to help support this channel.
So far the RG15 airfoil was the only airfoil available for SoarKraft models. It is fantastic for slope lift flying. However for powered flight and thermal duration there are better airfoils.
The MH32 airfoil was designed by Martin Hepperle in the early 1990s for F5D, F3E and F3B competition RC gliders and pylon racing. It is a good all around airfoil with good lift, low drag and gentle stall characteristics. This airfoil is considered a high lift airfoil, but can still really move. Fly on the slope or with the power pod. Or mix and match. The wing fits all of the fuselage options from SoarKraft.
Wing available with airframe or separate.
This wing uses:
1X - carbon tube - 7mm dia x 5mm x 1000mm tube spar
2X - carbon strip - 1 x 4mm x 1000mm (.6 wide works too.. but not as stiff)
Carbon rods and strips:
[ Ссылка ]
or
[ Ссылка ]
or
[ Ссылка ]
Flight tests are with these new available updates:
Park Flying:
Roughgen with Power Pod and MH32 wing in Polymaker LW-PLA
Red fuse - Black wing
Airfoil: MH32
Wingspan: 1.2M (48")
Flying weight = 705g
1400kV motor
30A ESC
9 x 5 folding prop
1000mAh 3S Lipo
T-Tail Roughgen with Power Pod and MH32, all in Polymaker LW-PLA
Red fuse - Black wing
Airfoil: MH32
Wingspan: 1.2M (48")
Flying weight = 685g
1400kV motor
30A ESC
9 x 5 folding prop
1000mAh 3S Lipo
On the Slope:
Roughgen 1.2M
Roughgen V2 (Cross tail) and the Pika (V-Tail)
Airfoil: MH32
Wingspan: 1.2M (48")
Flying weight = 560g
with the following construction
Polymaker LW PLA- fuse and tail fins
PETG nose cone and radio tray
eSun LW PLA (foaming) for wing panels
7mm x 5mm x 1000mm tube spar, 2mm rod longerons, 1 x 4mm else where.
4 cell AA NiMh radio battery (115g)
This is a carbon reinforced wing that is 3D printed, and is pared with whichever fuselage design your choose. Designed for speed and rough terrain landing. Based on performance and F3F competition models of the past 30 years, but as a 3D print-able version. Flies like a molded airframe, but 3D printed... so if you crash it, print another. Material are less than $20 for the whole airframe.
Print - Fly - Crash - Repeat
00:00 Intro
01:14 Airfoil Data
02:55 Printing and Building
05:28 Flight test 1 - Roughgen with power pod
07:22 Flight test 2 - T-Tail With power Pod
09:51 Flight test 3 - Roughgen on the slope
11:40 Flight test 4 - Pika on the slope
This model and options are available at [ Ссылка ]
Everything designed to print with Cura Slicer (Free) and settings available in instructions.
Here are links to printers and materials used in this video.
Clicking and following these links help fund this channel. Any support is appreciated.
We are not sponsored by any of these products and our opinions are our own.
3D Printers:
Awesome - Artillery Sidewinder X1: [ Ссылка ]
Cheap - Creality Ender3: [ Ссылка ]
Building materials:
PLA Filament: [ Ссылка ]
PETG Filament: [ Ссылка ]
Polymaker LW PLA: [ Ссылка ]
eSun LW PLA: [ Ссылка ]
Servos: [ Ссылка ]
Servo extensions: [ Ссылка ]
Dubro pushrods: [ Ссылка ]
Tools Used in this video:
4" file set: [ Ссылка ]
5.5" file set: [ Ссылка ]
Z-Bender: [ Ссылка ]
Round File for 6mm Spar Hole: [ Ссылка ]
Radios:
Awesome - Transmitter - FrSky X9D Plus: [ Ссылка ]
Cheap - Transmitter - FrSky X9 lite : [ Ссылка ]
Check out the airfoil tools website: [ Ссылка ]
#3DPrinted
#RCAirplane
#ItFlies
![](https://i.ytimg.com/vi/MogCgqYoTsg/maxresdefault.jpg)