Sim motion rig update with Full 6 inch (150mm) travel on all for corners, with 5 Degrees of freedom (5DOF)and full rear traction loss. More videos will be done soon. Wait till i show you Monster Trucks in this beast.
The rig on top of the motion system, is Track Racer TR160 - V4 this sits on top of the motion system which is, ERACING-LAB RS MEGA PLUS It consists of 6 actuators, all with 150mm of travel. 4 of these are for the rig, and 1 is for the traction loss, and the other is for surge, front and back. That gives 5 degrees of freedom (5 DOF) There are 3 layers to the motion system. This consists of the lower traction loss, which on the ground, then the upper part of the traction loss sits on that. The 4 actuators are attached to the side of the surge part of the motion system. Then the surge part of the motion system, sits on the upper part of the traction loss. Then the Rig sits on top of the surge system on sliders. The actuators are run by the servo drives, which connect to a Thanos controller, which is seen in the video in the glass door cabinet. Each actuator has its own servo drive, (white boxes in cabinet, with red lights on) and they in turn, connect to the Thanos controller, which is connected to the computer. The actuators are bought as a kit, and the motion system is assembled yourself using aluminium extrusion tubing, which is bought locally wherever you maybe located. The four actuators on the rig, are able to lift up to 400 kilograms, including the rig itself, driver, steering wheel, direct drive motor, and any other accessories. These actuators have a speed of up to 250mm of travel, per second. check out [ Ссылка ]
Subscribe now for more fun content.

Music: bensound.com
License code: AYCCRIDVPZ26919U

свернуть