How to build a 2L/min alkaline hydrogen generator
Current : 50A
Voltage : 12V
Rate : 2L/min
Catalysts : KOH(We recommend the use of KOH, and we have tested that NAOH is more likely to corrode stainless steel plates.)
Transformers : It is recommended to use transformers with constant voltage and current. This is because when the temperature rises, the current also increases. This can easily overheat and cause damage to the stainless steel plate.
In principle, 3 stainless steel plates can also produce 2 L/min of hydrogen. But the lifetime is very short and the temperature is very high. Our proposed solution is
(The diameter of the area involved in the reaction is 103mm)
1. Rate: 600 ml/min 15A, 12V, 3 plates
2. Rate: 1L/min 25A 12V, 6 plates
3. Rate: 2L/min 51A 12V, 9 plate, as well as a heat sink and a more advanced rubber ring.
If you have any doubts, you can tell us in the comments. We will do our best to answer them for you.
Feel free to subscribe to our channel and like our videos.
How to build a PEM hydrogen Generator :
[ Ссылка ]
PEM hydrogen generator VS Alkaline hydrogen generator :
[ Ссылка ]
Our website is: [ Ссылка ]
Here's an easier way to get this alkaline electrolyzer.
[ Ссылка ]

свернуть