Latest G3 Software Update - [ Ссылка ]
Checksum - 1fa57ad9

TheGigRig G3/Atom iOS App - [ Ссылка ]

Please ensure that you have the latest version of the app and during the process your iOS device remains turned on and close to your G3/Atom with also needs to remain powered

1. Check the current version of software in your unit by going the MENU/GLOBAL/VERSION. If the number matches the number above, you have the latest software. If the version you have has a lower number, you can update your software. PLEASE NOTE the higher the number, the newer the software
2. Download the latest software (link above) to your iOS device.
2. In your iOS device, turn on AIRPLANE mode, then turn on BLUETOOTH. This ensures no interruptions while doing the update
3. Backup your G3. You don't have to do this but I find its good practice to have a backup before an update

Now we are ready to do the update

4. On G3/Atom go to MENU/GLOBAL/BLUETOOTH and select UPDATE. This will start the Bluetooth on G3/Atom
5. Open the app, Then press CONNECT. Select your G3/Atom in the list, once connected, hit DISMISS
6. Select UPDATE on the app
7. At the top of the app, you'll see FIRMWARE FILES. Select the latest update file from the list
8. Press TRANSMIT
9. Take note of how many packets are being sent
10. After the update has finished transferring check the CHECKSUM
11. As long as you have the correct checksum, follow the onscreen prompts to install your software

If you've done a backup then you can do a factory reset and reinstall your back up.
This isn't 100% necessary but if you do find you have any issues with a particular press after the software update, simply clear that preset and re-program it.

свернуть