Buy Now!
New Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install new lower ball joints from TRQ on your 2000-2006 Toyota Tundra. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 21mm Deep Socket [ Ссылка ]
• 24mm Socket
• 27mm socket [ Ссылка ]
• Pliers
• Wire Cutters
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Floor Jack [ Ссылка ]
• Large Hammer [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
