This was a quick honey do project , where my girlfriend asked me for one of those wheelbarrows to put in the garden as a decor.
This is easy to do wheelbarrow that you can make in a weekend. I used basic tools as you can see, most of the work was carried with a handsaw. You will also need a drill to drill holes and attach screws.
You can customize it to your required size, i used 2x6 , 2x2 and 2x4 wood. If you will leave it in the rain outside, make sure you use cedar wood.
I will be providing links to the plans as soon as i finish them.

Tools:

Handsaw : [ Ссылка ]
Speed Square: [ Ссылка ]
drill
sandpaper

Supplies:

Note that in inch i am using the naming, and in cm the real size. for example a 2x4 inch wood is not exactly 2 inches by 4 inches.
Also note that when i refer to 2x8 , you can glue 2 2x4 to each other if 2x8 was not available.
Same for a 1x3 if not available you can saw a 1x6 in half. This is what i did since all the wood i used either came from a 1x6 or a 2x4.

Wood :

Wood_1x6 : we will use a lumber that is 1x6 inch // 2x15 cm , we will need around 20 ft // 6 meters
Wood_2x2 : we will use a lumber that is 2x2 inch // 4.5x4.5 cm , we will need around 6 ft // 1.5 meter
Wood_2x8: we will use a lumber that is 2x8 inch // 4.5x20 cm , we will need around 8" // 20 cm
Wood_1x3: we will use a lumber that is 1x3 inch // 2x7.5cm , w will need around 23.6" // 60 cm

Dowels :

5/16 ″ // 8mm to plug the screw holes
1" // 25mm for the wheel axle

Screws : 2.75" // 7cm


Cut List :

From the wood_1x6 lumber :

2 x 25.6" // 65 cm cut at 110 degrees angle
2 x 23.42" // 59.5 cm cut at 110 degrees angle
8 x 12.6" // 32 cm

From the wood_2x2 lumber:

4 x 15.74" // 40 cm

From the wood_2x8 lumber :

1 x 7.87" // 20 cm

From the wood_1x3 lumber :

4 x 11.81" // 30 cm

свернуть