Evan from Evan's detailing and polishing and Casey from Casey's Detailing and Polishing break down the difference in polishing with a 3,000 rpm buffer and a 6,000 rpm grinder. As you will see in the video the 3,000 rpm buffer takes longer to build up heat and and get the shine to lay down. With the 6,000 rpm grinder you can move much quicker and build heat much faster and get more done. Polishing at higher speed will also use less compound. Thus saving you time and money. But polishing with 6,000 rpm does have its risks. Polishing at that speed on aluminum can burn your aluminum if you move too slow or overheat an area by working it. 3,000 rpm is far more forgiving but does take more time and requires more materials to accomplish the same job. In the finish of the video you will see a slight difference in depth of the shine. The clarity and hashmarks are about the same level but the depth is a little better in the higher heat of the 6,000 rpm grinder. Thank you for watching. I hope you find these videos helpful. Of course remember that spinning at 3,000 rpm is much safer and softer buffs should never be spun faster than 2500 rpm.

Be sure to check us out on instagram: metalpolisher3826

And if you want to use any of the products that we use check out goshineon.com/shop.

Here are the product links to all the items we use in our shop:

Makita ga7021 [ Ссылка ]
6,000 rpm

Dewalt D28499X [ Ссылка ]
6,000 rpm

Makita 9227c [ Ссылка ]
3500 rpm variable speed

Makita 9237c [ Ссылка ]
3500 rpm variable speed

Dewalt dwp849x [ Ссылка ]
3500 rpm variable speed



White cotton towel options

12 x 14 (100 pack) [ Ссылка ]

12x 12 (24 pack) [ Ссылка ]




Makita 5" da or random orbit

hook and loop [ Ссылка ]





Extension cords

100' 10 gauge [ Ссылка ]

50' 10 gauge tri tap [ Ссылка ]

100' 12 ga [ Ссылка ]

50' 12 ga [ Ссылка ]

свернуть