Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a new Front CV Axle Shaft in your 2009-2015 Honda Pilot. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2009 Honda Pilot
2010 Honda Pilot
2011 Honda Pilot
2012 Honda Pilot
2013 Honda Pilot
2014 Honda Pilot
2015 Honda Pilot
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 24mm Wrench
• 10mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 22mm Socket [ Ссылка ]
• 24mm Socket
• 35mm Socket [ Ссылка ]
• Brake Caliper Hanger [ Ссылка ]
• 1/2 Inch Breaker Bar [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves [ Ссылка ]
• Liquid Thread Locker
• Safety Glasses [ Ссылка ]
• Sandpaper
• Hammer [ Ссылка ]
• Punch
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
