**Written Instructions Below**
Purchase From Amazon.com:
[ Ссылка ]
1. Be sure that you have all the necessary materials needed. Each IQ shield "Spray Install" kit will include an installation bottle, squeegee, lint-free cloth and screen protector for your device.
2. Find a flat, clean and well-lit work environment before you start installing the IQ shield. This is to make sure that you avoid dust, lint, small hair follicles or other micro-debris from getting under the film during the installation process.
3. Turn off your device. If possible, also remove the battery.
4. Wipe your device's screen with the lint-free cloth and remove all visible dust and fingerprints.
5. Wash your hands thoroughly to make sure no dirt or oil get on the screen protector or screen.
6. Spray your fingertips with the installation solution bottle provided. Moistening your fingers will help prevent any fingerprints from getting on the screen protector or screen during installation.
7. With your wet fingertips, carefully peel the IQ Shield from its backing liner.
8. With one hand, hold the film steady with the adhesive side facing up. With your other hand, begin to spray the screen protector's adhesive side with the installation solution bottle provided.
***Be sure to spray a COMPLETE AND EVEN LAYER on the adhesive side***
9. If the screen protector is dripping wet, gently shake off the excess installation solution.
10. Place the screen protector on your device. You should be able to easily slide the IQ Shield around to make any necessary adjustments. Please take your time until the IQ Shield is completely aligned.
11. Once the film is perfectly positioned, take one hand to hold the film in place. With your other hand, you'll be pushing out all the excess solution from under y our IQ Shield with the squeegee provided.
***AVOID pushing the solution into any holes, speakers, and buttons on your device***
12. When you're done, gently pad away all the leftover solution with the lint-free cloth, and let your device sit for at least 12-24 hours if possible. We suggest installing the IQ Shield at night before heading to bed. By morning, the IQ Shield should be settled onto your screen, and your device should be ready to go.
13. If there are visible micro-bubbles and streaks left under the IQ Shield, simply wait for them to disappear. Your screen should be completely clear in a few days.
