Hose routing for dual pass endplate and dual pass heat exchanger, with Option B. This will work for any LSJ car.
2004-2007 IRL
2005-2007 Cobalt SS
PART 2 CAN BE SEEN HERE: [ Ссылка ]
Part list:
ZZP Heat Exchanger Silicone Hoses:
[ Ссылка ]
ZZP Dual Pass Endplate:
[ Ссылка ]
ZZP Option B kit:
[ Ссылка ]
ZZP LSJ Silicone Radiator Hoses:
[ Ссылка ]
90° Brass Elbow for stock H.E.:
NOTE!! YOU CAN GET THESE AT YOUR LOCAL HARDWARE STORE. JUST LOOK FOR: 1/8" NPT to 1/4" Barb 90 degree elbow.
Posted from:
[ Ссылка ]
Ion takes a 90 deg 1/8 npt with a 1/4 barb fitting, but Cobalt takes a straight 1/8 npt with a 1/4 barb fitting more room on the cobalt as it has a simpler front radiator rail.
FOR THE OPTION B TANK CLEAR HOSE (in this video):
Get a 1/4" inside diameter hose (heat resistant and solid so it doesnt flex or expand), 2.5 feet long ( 30 inches, or 76 centimeters).
The reason I chose a clear hose is to see if it's actually working! And looks kinda cool.
I hope you enjoyed! If you could like this video, I would highly appreciate it!! I upload on an unscheduled basis, so whenever I upload, i upload. Subscribe for a bunch of stuff! I post more than just car videos 🤟🏼
