Here’s what you’ll need…
- Paint & brush or sponge
- Painter’s tape
- Drop cloth
- Cardboard (7-8 in. wide)
- Utility knife
- Ruler
- Pencil
- Ladder
Step 1: Make your stencil. I drew a line and then cut from the center to about 2 inches down, on each side.
Step 2: Prepare your paint in an easy to grab container. You don’t need much.
Step 3: Practice your paint strokes on your stencil.
Step 4: Apply painter’s tape 4 inches from the left wall, then 8 inches thereafter. The tape marks the center of the herringbone pattern.
Step 5: Take your stencil and paint your first strokes.
Step 6: Hand-paint the remaining strokes in the column, using the surrounding marks as your guide. Repeat steps 5&6 until you’re done.
Remember this does not need to be perfect!
Good luck!!
Alex
#accentwall #herringbonewall #handpaintedherringbone
![](https://s2.save4k.ru/pic/PHUVVSg3ol0/maxresdefault.jpg)