How to measuring rail wear value by the sliding rail wear gauge ?
First, determine the position of the vertical ruler, align the zero line of the vertical ruler horizontally with the one-third line of the main ruler, and tighten the fastening screws.
Second, reset the data of the vertical ruler and the data of the side grinding ruler, push the vertical grinding ruler to align the two zero lines, press the reset key of the digital display meter, and slide the side grinding ruler to make the two zero lines Line alignment, press the data clear key, at this time the positioning and data clearing are completed, start the measurement.
Third, pull the side grinding ruler and the vertical grinding measuring ruler to the farthest end, and attach the positioning block to the non-working part of the rail to be tested. At the side rail jaw, after the adsorption is completed, push the side grinding ruler and the vertical ruler so that the front ends of the two measuring rulers touch the rail, and read the data of the two digital display meters, which is the vertical wear and side wear values of the rail here.
The sliding rail wear ruler can not only measure the wear of the rail, but also measure the drop value of the tip rail and the side wear value of the wing rail.
More detail contact 008615015909102 or email inquiry@linkagetrack.com

свернуть