Item# 05HANDCRMP
[ Ссылка ]

Cutting crimping pliers are used to finish the edges of spiral coils on the outsides of your book. They cut the coil to size, and crimp the edged in, preventing the coil from being spun our from the book.

Using the cutter crimper pliers is simple. Place your coiled document flat on a table. Looking at the pliers, you will see one side has a red dot and the other side doesn’t. With the red dot of the pliers facing → UP, ← position the pliers into the right hand side of the document with the cutting head in the center of the coil of the book
(It is important where the cutters are positioned on the coil; not too far down and not too far up, but into the center of the coil or they will not crimp). Now just squeeze the handles. Then →FLIP THE BOOK← and repeat the procedure
(You need to flip the book because the cutting crimping pliers only crimp in one direction)

свернуть