Hello everyone, welcome to Reyee 3-min video. I'm Leo
Today I will show you how to setup Reyee wireless network via mobile Cloud APP.
Here are some samples of Reyee network devices.
One wall mounted Access Point.
Two Ceiling mounted Access Points.
One Cloud Managed POE Switch.
One 5-port SMB gateway. Which is the "brain" of a network.
All these samples are factory default configuration now.
Now, let me connect cables.
Then wait 3 mins for all device online automatically.
3-Min later, open Ruijie Cloud APP, and go to "Project" menu.
Click "Create First Project" button.
If your topoloy have Reyee AP, then choose "Yes".
Otherwise choose "NO".
Here is a tip, says that must wait 3 mins after all device powered on.
We already did it. So go next.
As the tip, let's connect the SSID which started as "@Ruijie-m".
Click blue button "Connect" to go next.
Let's find the SSID.
Here, find it, the SSID is "@Ruijie-mDA4A" in this case.
Click to connect it.
Let's go back to Ruijie Cloud APP.
Loading, wait few seconds.
OK, all devices are detected successfully.
If any device missed, Click the "Detect Again" button.
OK, click the blue button "Start Config" to go next.
OK, in this page, let's give a name for this case "SONTest".
Set a password as "a12345678" for project management also.
Choose "scenario" based on actually using.
We choose "Hotel" for this case.
As the tips, let's set WAN connection at here.
As my topology, I choose "DHCP" to get ip address.
Then "Next".
Very good, the setup is finished now.
The wirelress network is configured succussfully.
Here is also have a internet speed test, for your bandwidth checking.
Next, follow the process, we can change Wi-Fi Name from default one.
Set the SSID name as "SON WiFi".
Password "12345678"
"Radio Code" choose your country.
Click the blue button "Save".
As tips, let's connect new WiFi name.
Click the blue button "Connect" to mobile WiFi page.
Let's find and connect it, it at here.
Connect with new password "12345678".
Back to Ruijie Cloud APP.
We can check the actual topology in mobile.
Back to project list, and go into the project with Cloud mode.
Click the "Topology" button.
Got it.
Google to check the Internet connection.
Speed Test to check also.
So easy, have you got it?
Try by yourself now.
