[ Ссылка ]
UNI-T UT204A is a reliable digital clamp meter designed for measuring AC/DC voltage and current, resistance, frequency, and duty cycle that can also perform diode and continuity testing.
In this video, we’re showing you the measurement of direct and alternating currents, and voltage and discussing the basic functions of the UNI-T UT204A.
With UNI-T UT204A, you can measure direct and alternating currents of up to 600 A.
The clamp meter is compact, lightweight, and made of top-grade plastic.
The maximum diameter of the clamp opening is 28 mm.
The front panel accommodates basic controls, display, and terminals for connecting testing probes. The battery compartment is located on the backside. UNI-T UT204A is powered by a 9 V battery. On the bottom side, there’s an eye lug for a strap.
Now, let’s take a closer look at the functions of the device.
The meter turns on by rotating the power switch. The first position is voltage measurement. Using the SELECT button, you can switch between direct current voltage and alternating current voltage measurements. There are also relative measurement and data hold functions.
When turning the switch to the multifunction position, the resistance measurement function is activated by default. By pressing the SELECT button, we switch to the diode test function, which is followed by the circuit check and the capacity measurement modes, where you can measure a capacity of up to 100 mF.
Next up, the frequency measurement function allowing the measurement of up to 10 MHz.
This is followed by the temperature measurement mode, the use of which requires a thermocouple probe.
Finally, the current measurement mode proper. By pressing the SELECT button, same as you do to access the voltage measurement mode, you can switch between alternating and direct currents, as well as relative measurement and data hold functions.
The final position is the electric current intensity measurement mode, with the maximum current range of 600 A.
UNI-T UT204A is a less expensive, highly reliable, and multifunctional digital clamp meter that perfectly meets any demands of car enthusiasts thanks to its precise measurement of direct electric current.
The clamp meter comes in a special bag, where you’ll also find a thermocouple probe for measuring temperature, a small strap, a testing probe set, and a user guide.
Find us on social networks for more updates and useful tips:
👍 [ Ссылка ]
👍 [ Ссылка ]
#toolboom #unitrend #multimeter
