Steve Moriarty takes on the mammoth task of finishing the crown on the biggest Morganite he's ever laid eyes on, aiming for a museum quality gemstone. He dives into cutting 80 facets with a mix of anticipation and a plan involving a variety of laps for that perfect cut and polish. Adjusting angles and squaring up facets becomes the game. It's a journey through grits, from 360 to the finer 600, and 1200, all to speed up that final polish. The crown sees Moriarty wrestling with the the monster table, applying techniques, and occasionally winging it to keep everything square and shiny. Despite the meticulous process and the hours spent polishing, there's an air of casual mastery as he navigates through the challenge. After finishing all the polishing he soaks off the epoxy overnight in anticipation of the big reveal. It's been a hefty project, but Steve's ready to see if his efforts turn this Morganite into the gem he's envisioning.
You can see the full details and 𝗕𝘂𝘆 𝗧𝗵𝗶𝘀 𝟮𝟵𝟰𝗰𝘁 𝗠𝗼𝗿𝗴𝗮𝗻𝗶𝘁𝗲 on our website here: [ Ссылка ]
𝗪𝗮𝗻𝘁 𝘁𝗼 𝗯𝘂𝘆 𝘆𝗼𝘂𝗿 𝗼𝘄𝗻 𝗳𝗮𝗰𝗲𝘁𝗶𝗻𝗴 𝗺𝗮𝗰𝗵𝗶𝗻𝗲? Read Steve Moriarty's review on the machine he recommends: [ Ссылка ]
Ready to get started on your faceting journey with Ultratec? Don't forget to let them know that Steve Moriarty sent you and we'll ship you a piece of rough that should cut a $200 - $300 stone when finished!
**In order to qualify for the free piece of rough, when you order, be sure to include a note (there is a section for this when ordering), send them an email, or give them a call stating that you bought the machine on Steve Moriarty's recommendation. After that, email us the proof of purchase and once we confirm your order with them, we'll send you the free piece of rough!
1. Buy Your Machine Here: [ Ссылка ]
2. Let them know you bought on Steve Moriarty's Recommendation
3. Email us at Sales@MoreGems.com and show us proof of purchase.
4. We'll Confirm your order with Ultratec and when we receive credit, we'll send you a piece of rough!
**This offer is for a limited time only! Details are in the link above.
𝗧𝗼𝗼𝗹𝘀 𝗮𝗻𝗱 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 𝘂𝘀𝗲𝗱 𝗶𝗻 𝘁𝗵𝗶𝘀 𝘃𝗶𝗱𝗲𝗼:
Optivisor (I've used 7 and currently a 10): [ Ссылка ]
10x Loupe: [ Ссылка ]
Flat Aluminum Support (Master Lap): [ Ссылка ]
Diamond Laps: [ Ссылка ]
Lightning (Topper) Laps: [ Ссылка ]
Batt Lap: [ Ссылка ]
Dynalap 8" Spectra Laps: [ Ссылка ]
Cerium Oxide: [ Ссылка ]
50,000 Diamond Powder: [ Ссылка ]
Attack Epoxy Solvent: [ Ссылка ]
Watch the Next Video in the Series Here: [ Ссылка ]
Check out our full playlist of Lapidary Tutorial Videos here: [ Ссылка ]
Video Produced and Edited by Michael Moriarty
𝗦𝗵𝗼𝗽 𝗢𝘂𝗿 𝗝𝗲𝘄𝗲𝗹𝗿𝘆 & 𝗚𝗲𝗺𝘀𝘁𝗼𝗻𝗲 𝗪𝗲𝗯𝘀𝗶𝘁𝗲𝘀
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
Moriarty's Gem Art
126 S Main St.
Crown Point, IN 46307
Sales@MoreGems.com
#Lapidary #gemcutting #gemstones
![](https://s2.save4k.ru/pic/PzhdV2W-3LI/maxresdefault.jpg)