Clipsal WHB320RG Weatherproof Switch 3 Pole 20AMP IP66
Available at Sparky Direct - Electrical Online Wholesaler
[ Ссылка ]

The Clipsal WHB320-RG weatherprotected isolating switch is suitable for virtually any external application. The impact resistant base and cover will survive the hardest knocks in almost any installation. The two sections are sealed with a co-injection gasket. The range provides ample conduit entries and is suitable for side entry from a vertical duct. Its compact size means it is aesthetically pleasing and suits installations where space is limited such as with residential air conditioning, outdoor lighting and small motor control.

Key Features:
1 gang Isolating switch
1 way, on/off switch
8 mm diameter padlocking facility
M220 rating
500v 50Hz
Dimension: 85 mm Height x 165 mm Width x 94 mm Depth
Cables looped in and out from overhead
In and out from underground
In and out straight through the switch
Cables in through side and out through bottom
1 x 25mm knockout 1 x 25mm pre-scored are moulded in the base
1 x 25mm knockout each side & 2 x 25mm screwed entries both top and bottom
2 x 25-20mm reduced reducers included

What does an Isolating Switch do?

They're used in many homes and businesses to ensure a circuit can be safely turned off from electrical supply for maintenance and fault finding.

#Switch #ElectricalSupplies #SparkyDirect

свернуть