If you're interested in following me further, feel free to check out my gaming channel: [ Ссылка ]
I decided to try and make a PC water cooling distribution block. I've never done this before, but it turned out pretty good! These things are meant to be just another way of routing water throughout your PC, and you need a CNC machine to make them look good. Here's how I made this one.
CyberDen Systems: [ Ссылка ]
Jojococo Studio: [ Ссылка ]
Water cooling fittings are usually size G1/4. I cut a hole that was 11.8mm diameter and tapped it with a G1/4 size tap. I put a 2mm gap between the O-ring channel and the water channel, and the O-ring channel is 3.2mm wide and 2.2mm deep, with a 3mm O-ring. I spaced the screws about 1 inch apart, and the diameter of the screw holes was 3.7mm wide for the tap and 8mm wide for the head. The tap was a size M4x.07mm and the screws were size M4 10mm. The tools and hardware I used are linked below!
Tools and materials! (Affiliate links)
M4 10mm screws: [ Ссылка ]
3mm O-ring cord: [ Ссылка ]
Loctite 406: [ Ссылка ]
2' square 1/4" thick acrylic: [ Ссылка ]
2' square 1/2" thick acrylic: [ Ссылка ]
M4x0.7mm tap: [ Ссылка ]
tap handle: [ Ссылка ]
G1/4 tap: [ Ссылка ]
CNC machine: [ Ссылка ]
Fusion 360: [ Ссылка ]
My socials! If you want to see updates between videos, this is how
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
Discord chat: [ Ссылка ]
For business inquiries:dietecmods@gmail.com
