fully automatic hardware packaging machinery with 8 bowls&tam otomatik vidalı paketleme makinesi designed and manufactured by our engineer team in cosmetic&food&pharma making and packaging machinery is widely used in the daily chemical industry like the screw packaging process/rivet packing and such like.We as a famous manufacturer moreover can design and produce the packaging machine according to the special requirements from customers.
Automatic carton flaps folding and automatic carton corner side sealing machine working together, make a "H" shape sealing.
According to the size of the carton, manually adjust the machine width and height, suitable for sealing different cartons.
Functions and features:
1.According carton size, manually adjusting the width and height of the machine, simple, convenient, fast.
2. The machine adopts PLC control, simple operation, easy maintenance, stable performance.
3. For a variety of automatic folding carton sealing cap H-type, the upper and lower corners of carton sealing edge and automatically, smooth, fast and smooth, but also with supporting the use of automated packaging line.
4. Fold the front cover by carton sealing machine sealing machine into the 90-degree angle, box board by pushing the Edge Sealer.
5. Sealing beautiful, fast, labor-saving, high efficiency.
6. Simple, economical and durable, safe, low failure rate.
Working Flow
Manual Feeding Carton- -Automatic Flaps Folding-- Automatic Sealing Top and Bottom-- Automatic Pushing Carton Forward-- Automatic Sealing Carton Corner Side- Complete.
Basic parameter of YX-H50-A H type cartons folding edges carton sealing machine full automatic case cello tape Sellado de cartón automático:
Model YX-H50-A
Carton Size L200-730mm*W150-500mm*H150-7200mm
Table Height Min.H500mm Max.H750mm
Packing Speed 8-10cts/min
Machine dimension L2800 * W1900 * H1550mm
Power supply 220V 50/60HZ 1.8KW
Air compressing 6-7kg
Adhesive tape width 48mm/60mm/72mm
Machine weight 450kg
The automatic flat labeling machine is the new generation of packaging equipment. It is special designed based on the automatic labeling machine technology and technical requirements. Can make the adhesive labels stick on the bottle surface smooth and tidy. Labeling process is stable and reliable, and labeling position can reach the ideal requirements.
basic parameter of automatic suction type plane surface labeling machine card books notes labeller:
1. Voltage: AC110V;50/60HZ
2. Power: 180W
3. Speed: 0-240 pcs per minute (according to the size of the product and the label)
4. Accuracy: ±1mm (according to the surface evenness of the product)
5. Suitable range of the products: Length 30mm-300mm, Width 30-260mm
6. Suitable range of the labels: Length 20mm-300mm, Width 15mm-120mm
7.Specification of the label roll: Outer diameter: 300mm, Inside diameter: 76mm
8.Overall dimensions: 2000mm×650mm×1300mm(L×W×H)
9.Weight: 250 Kg
Operating Principle of flat surface labeling machine:
When the product is put to the conveyer manually, the conveyer will send the product to the photoelectric sensor area, when the photoelectric sensor get the signal, it will feedback the signal to the system, after receiving the signal, the stepping motor will send out the label, and stick the label on the surface, another photoelectric sensor will limit the sending of the next label on time. When the bottles are sent continuously, the labels are sent out one by one, and label on the surface correctly, after stick the labels on the surface, the brush will smooth the label and ensure the labels stick on the product tightly and smoothly, then the product will be automatic output, the labeling process is finished.
Operation Procedure for flat labeller model YX-PL510
1. Fix the label roll on the machine according to the graphical representation, adjust the height of each part.
2. Check if all the position of the labels are correct.
3. Adjust the distance between the two rails, the distance between the brush and the conveyer, make sure the distance is suitable for the product to pass.
4. Turn on the power switch, turn on the optoelectronic switch.
5. Turn on switch of the motor and label sending device, debug labeling, if there are any abnormal, get rid of them.
6. Adjust the labeling position.
7. Ensure the test is OK, then operating the machine normally.
8. Power off.
Our Factory since 1992 has been manufacturing the cosmetic&food making and packaging machinery.In these field we have the experience rich enough to solve the questions encountered by our customers from both home and abroad.For more information about various high quality machinery,please email via jackdu999@yahoo.com or browse our website [ Ссылка ].
Watch us on Youtube :[ Ссылка ]
Follow us on News Center:[ Ссылка ]
Skype us by :turnanewleaf
Call us via:0086-15811882441
Whatsapp:0086-15811882441

свернуть