Quick how to for the new electronic Y lead by Powerbox-Systems, the Micro Match, which allows you to individually set up the two servos on the other end of the Y lead, while still only using one channel.
**CONNECTIONS & SETUP:
Both servos on one side, receiver on the other, and USB/Bluecom adapter to spare lead for programming
1- Open Powerbox Mobile Terminal software and connect with the MicroMatch
2- Select MicroMatch and then Quick Connect
3- Use reverse option individually per servo if necessary
4- Individually program the center, then maximum throws each way, one by one:
a- With the stick in the position required (Center, full left or full right) press START
b- Use the slider to adjust that position of the servo (Moving the slider only a small amount adjusts the servo very precisely and slowly // Moving the slider to the end adjusts the servo very quickly in large increments)
c- Once at the desired position, de-press START
5- Repeat for the rest of the servo positions.
![](https://i.ytimg.com/vi/QhyRamKK9K0/maxresdefault.jpg)