In today's video I will be showing you how to glue a broken piece of metal back together using J-B Weld cold weld steel reinforced epoxy. This is the final one of three videos on repairing metal.

You can buy me a coffee here [ Ссылка ] or become a monthly member to unlock Discord forum membership, exclusive content and automatic entry into my FREE Monthly Giveaway. Thank you SO SO much!!

You can now access my 🛠Charlie DIYte Amazon Tool Store here [ Ссылка ] - where you'll find all my tried, tested and much loved DIY tools arranged into handy categories.

TODAY'S TOOLKIT
- J-B Weld Epoxy glue [ Ссылка ] (Amazon) (UK)
- J-B Weld Epoxy glue [ Ссылка ] (Amazon) (US)
- J-B Weld Epoxy glue steel reinforced [ Ссылка ] (Amazon)
- 120 grit sand paper 5m [ Ссылка ] £10.39
- CT1 Multi Solve Spray [ Ссылка ] (Amazon)
- cloth/ gaffer tape
As an Amazon Associate I earn from qualifying purchases

I'm currently repairing and renovating the cast iron gutters on my old cottage. Today's repair is to glue a piece of metal back onto the down pipe - which I suspect was broken when the gutters were originally installed back in the 1970s.

After researching on the web I decided upon J-B Weld as it works on multiple surfaces, including cast iron and steel, and is reputed to provide strong, long lasting repairs.

After cleaning each surface to be glued with wire wool and CT1 Multi-solve degreasing spray, I mixed two equal parts of the steel and hardener, and applied them to the edges of the broken piece. I then pressed the two pieces together. The joint does then need holding in place with gaffer tape as it takes 4-6 hours to set and a further 15 hours to cure.

The end result - an incredibly strong joint that I'm really happy with.

SUBSCRIBE - you can subscribe to my Channel here:
[ Ссылка ]

LET'S CONNECT!
Charlie DIYte
-- Email: charliediyte@gmail.com
-- [ Ссылка ]
-- [ Ссылка ]
-- [ Ссылка ]
-- [ Ссылка ]

свернуть