Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com [ Ссылка ]

This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 2011-2016 Hyundai Elantra. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.

This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• Dead Blow Hammer [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• Vacuum
• Ratchet [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Rubber Mallet [ Ссылка ]

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть