This tutorial applies to Automowers manufactured from 2016.
Tools used:
T20 Torx screwdriver
Philips screwdriver PH1 and PH2
Ratchet wrench or drive handle
Round file
Torque screwdriver (accuracy at least one decimal place)
Puller
Outer circlip pliers
Inner bearing puller for 8 mm inner diameter ball bearing
Inner circlip pliers
Hydraulic press, vise or a big hammer
Bench grinder
12 point 19 mm socket
16 mm milling cutter
Punch
Parts used:
Wheel motor original ball bearings are 698ZZ (8 (ID) x 19 (OD) x 6 (Width) mm), if changed use 698RS or 6982RS, because they have better moisture resistance.
Original oil seal (8 (ID) x 15.5 (OD) x 3 (Width) mm), replace with (8 (ID) x 16 (OD) x 3 (Width) mm)
Lubricants used:
ADDINOL Multi-purpose Grease L 2 MO NLGI 2
Silicone grease NLGI 2
Soaking liquid:
White spirit (mineral spirit)
Price for one wheel motor gears regreasing is 20 € (VAT included).
Price for one wheel motor gears regreasing and two outer bearings change is 40 € (VAT included).
Wheel motor rebuild kits can be ordered here: [ Ссылка ]
