This coin door was installed into a Raspberry Pi 3 arcade cabinet.

While our custom-built coin door worked well for several months, some parts were chipping off due to heavy use. We decided to replace it with a real coin door with coin mechs from X-Arcade. This video shows how we did it.

Arcade Coin Door With Quarter Acceptor X-Arcade
[ Ссылка ]

The wiring was connected to the USB Encoder used by the Joysticks/Buttons. The coin door works just like any other button/joystick. Below is a link to the item we used :

Easyget LED Arcade DIY Parts 2x Zero Delay USB Encoder + 2x 8 Way Joystick + 20x LED Illuminated Push Buttons for Mame Jamma Arcade Project Red + Blue Kits

[ Ссылка ]

Like or subscribe if you want to see more videos like this in the future!

свернуть