This video series is about a DIY canoe made from plywood, which I designed and made myself. I decided to make a cheap canoe, which can be built in a rather short time. So this canoe is made of plywood and built with the stich and glue technique. The wood I used, in the end, was pine and it was actually waterproof.
In This first part I show you how I came from the idea to my CAD-model, made the plans and templates and started cutting out all parts of the hull. All plans and templates were made in Lockdown when I had enough time for this.
Requirements:
- Min. Time: 70h
- Min. Workspace: 6 m * 3 m
- Power Tools: Jig Saw, Eccentric Grinder, Circular Saw, Router, Vacuum Cleaner
Bill of Materials:
- 3 Sheets of Plywood (250 * 120 cm)
- Wood for Gunwales, seats
- Epoxy 2.5 kg, Cotton powder 1l
- Varnish 2.5 kg
- 2 Sheets of Fiberglas 160 g/² (1.5 * 5m)
Total Dimensions: [ Ссылка ]
Arrangement on Plywood: [ Ссылка ]
Plans in DIN A0:
Bottom 1 [ Ссылка ]
Bottom 2 [ Ссылка ]
Planks 1 [ Ссылка ]
Planks 2 [ Ссылка ]
Scarf-Joint-Jig: [ Ссылка ]
_______________________________
Instagram: [ Ссылка ]
