All new disc brake pads and rotors need to be put through a bedding in procedure before your first ride. Once bedded in correctly, your brakes will perform with consistent and powerful braking, and offer silent operation. Failing to bed in your disc brakes will almost guarantee to result in vibration, noise, poor modulation, and loss of power. In this video, we take you through the steps to correctly bed your new disc brake pads and rotors in, as well as some handy tips to deal with brake noise.
Questions or comments? Leave them below!
⏰ Timestamps
0:00 Brake Noise Introduction
0:47 Disc Pad Removal
1:05 Brake Caliper Prep
1:15 Disc Pad Install
1:35 Disc Rotor Prep
2:02 Brake Caliper Alignment
2:19 Bedding In Procedure
2:58 Disc Rotor and Pad Sanding
3:34 Effect of Water on Brakes
3:51 Bent / Damaged Rotors
4:07 Burnt / Overheated Rotors
4:31 Minimum Rotor Thickness
🔧Tools & materials used -
Uberbike Disc Brake Cleaner 500ml.
Uberbike Flatout XL Disc Brake Rotor.
Uberbike SRAM Guide Race Matrix Finned Disc Brake Pads.
240 Grit Sandpaper.
Park Brake Piston Press.
Park 3 Way Hex Wrench.
🎥 Visit our YouTube Channel - [ Ссылка ]
🚵♀️ Visit our FAQ section - [ Ссылка ]
🎥 Subscribe - [ Ссылка ]
📱Why not give us a follow on our socials
» Like - [ Ссылка ]
» Follow - [ Ссылка ]
📺 Shop - [ Ссылка ]
