Die Snapstar-Fettkupplung lässt sich einfach auf den Schmiernippel aufstecken und fixiert sich von selbst. Zudem hat sie ein manuelles Entlastungsventil.
Wir haben für Euch das Werkzeug unter die Lupe genommen
Aus profi 03/2022: [ Ссылка ]
Hallo zusammen!
Wie ihr es mit Sicherheit schon mitbekommen habt, nehmen wir in jeder profi ein Werkzeug etwas genauer unter die Lupe
– in Zukunft möchten wir euch diese auch in kurzen Videoclips präsentieren.
Viel Spaß dabei.
Das besondere an der Umeta Greifkupplung ist, dass sich diese automatisch auf dem Schmiernippel fixiert.
Hierfür hat die Kupplung 4 Backen, die sich auf dem Schmiernippel verriegeln.
Eine Abdichtung erfolgt – anders als bei vielen anderen Kupplungen - über eine Metalldichtung,
die wie man hier sieht, leicht konisch zuläuft.
Alternativ zur einfachen Kupplung hat Umeta auch diese Kupplung mit Entlastungsventil im Programm.
Diese Kupplung eignet sich z.B. auch vor allem für Akku-Fettpressen, weil diese sehr hohe Drucke aufbauen – teilweise bis über 600 bar.
Allerdings ist die Kupplung auch eine gute Hilfe bei Handhebel-Fettpressen, da man die Kupplung beim Befüllen des Schmiernippels nicht mehr festhalten muss.
Umeta bietet hierfür zwei Gewindegrößen an: Zum Einen für G 1/8-Gewinde und zum Anderen für M10x1mm-Gewinde
Um die Kupplung auf dem Schmiernippel zu fixieren, stecke ich diese einfach auf den Schmiernippe auf und der Überwurf fixiert die 4 Backen indem er nach vorne schnellt - und ich kann die Kupplung nicht mehr abziehen.
Anschließend kann ich, ohne die Kupplung festzuhalten den Schmiernippel abschmieren - so!
Kommt es zu einem hohem Staudruck, haben wir gemerkt, dass man den Überwurf nicht mehr gescheit zurück ziehen kann.
Hierfür hat Umeta das Überdruckventil angebaut. Lösen wir es, kommt das überschüssige Fett aus dieser kleinen Bohrung heraus, ich kann den Überwurf lösen und die Kupplung abziehen.
Wenn man jetzt diese beiden Kupplungen noch einmal vergleicht, dann fällt auf, dass durch das Entlastungsventil die andere Kupplung natürlich etwas länger baut.
Preislich liegen diese Kupplungen 10 € auseinander: Während die Kupplung mit Entlastungsventil etwa 60 € kostet, kostet die einfache Kupplung rund 50 €.
Vor allem die Variante mit Überdruckventil eignet sich gut für Akku-Fettpressen, da diese sehr hohe Staudrucke aufbauen können.
Verbessert werden könnte die Länge des Schaftes. Bei Fettnippeln, die tief z.B. in Verkleidungsblechen eingelassen sind, gibt es gelegentlich Probleme, da man den Schaft nicht mehr gut erreicht, um die Kupplung von dem Nippel zu lösen.
Ansonsten ist die Kupplung eine Empfehlung wert.
Credits:
Bericht: Alexander Bertling
Produktion: Roman Hünefeld
Musik: Come Get With Us by TrackTribe
Ещё видео!