Buy Now!
New Sway Bar Kit from 1AAuto.com [ Ссылка ]
This video shows you how to install an entire kit of front sway bar, sway bar links, and sway bar bushings with brackets on your 2007-2009 Saturn Aura. When your sway bar has rusted or bent to the point of causing problems with your suspension, steering, or alignment, you’ll need to replace it, and likely the links and bushings as well.
This process should be similar on the following vehicles:
2007 Saturn Aura
2008 Saturn Aura
2009 Saturn Aura
Tools you will need:
• Pry Bar [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• Locking Pliers [ Ссылка ]
• 1/2 Inch Air Impact Gun [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Swivel
• Silicone Paste
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
