Once again Asymod breaks the barrier of limitations presented by this great software defined transceiver.

Now your IC-7300 will transmit in Hi-Fi asymmetrical AM, eSSB and to the widest allowed in FM throughout all bands.

The Asymod Standalone Unit defeats a set limitations presented by the IC-7300, such as:

• AM TX bandwidth
• SSB TX bandwidth
• FM TX bandwidth
• ALC
• Minimum carrier 5 watts
• Maximum AM modulation at ~90%
• Swings backwards on RMS RF power meter

Now you can set your audio frequency roll offs points as desired via the audio process and achieve maximum TX bandwidth in AM, SSB & FM. The ALC timing has been modified to allow for max AM & SSB power. The carrier can be set from a .25 watt (250 mW) to 20 watts (It is not recommended to exceed a 10 watt carrier to allow for sufficient headroom. AM modulation can now be set to up to 250% positive modulation with the asymmetry control. Some Asymod customers have actually sent in their IC-7300 to have the Asymod Standalone Unit installed to have forward instead of backward movement on their RMS RF power meters.

For proper operation throughout all the bands, settings on the IC-7300 should be set to:

• RF POWER: 75%
• MIC GAIN: 50%

Audio samples on this video are only for demonstration. Audio preferences and roll-off varies depending on the audio process settings and is up to the end user to adjust them as needed. The Asymod 6 is preset to roll-off at 20 dB/decade at ~10 kHz. Modification to the onboard low pass filters will allow for greater bandwidth.

This mod is available for other HF transceivers.

Site: www.asymod.am
Email: asymod@asymod.am
Tel: 1 (786)-554-8077 #HiFiRadio #HiFiAM #Asymod

свернуть