LBS supply a PVC-U Eaves Support Tray which comes in 1.5m lengths.
The purpose of the Eaves Support Tray is to prevent the membrane sagging between rafters and the ponding of the membrane behind the fascia board at eaves level. It will also stop the membrane projecting out into the gutter where it could deteriorate with exposure to the elements.
When fitting the LBS PVC-U Eaves Support Tray, fix it into place with nails directly above the over fascia ventilator which is fitted on to the fascia board.
The short edge of the Eaves Support Tray should project downwards towards the gutter and the longer edge should project upwards along the slope of the rafter.
If the unit must be cut for fitting, this can be done using hand snips.
When joining eaves support units together you must overlap each unit by 150mm before nailing them into place.
The LBS Eaves Support Tray is quick, effective, and easy-to-fit and will improve the performance of your roof.
