Click for more info and reviews of this CURT Hitch Cargo Carrier:
[ Ссылка ]
Check out some similar Hitch Cargo Carrier options:
[ Ссылка ]
Search for other popular Ford Explorer parts and accessories:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Today on our 2012 Ford Explorer, we'll be test fitting part number C 18100. This is the Curt 20x60 folding aluminum cargo carrier for 2-inch hitches. Now, to begin our test with, we'll slide the cargo carrier shank into the hitch, line up the hitch pinhole, and install our hitch pin. We'll then put the safety clip on the other side of the hitch pin, which will secure our cargo carrier to the vehicle. Now, we'll go ahead and give you a few measurements. Our ground clearance at the cargo carrier is 12-1/4 inches, and from the closest point of the cargo carrier to the back of the vehicle with the cargo carrier in the stored position, is 1 inch.
We'll now go ahead and pull the pin to unfold the cargo carrier platform. We can then give you a few more measurements. From the closest point of the platform to the back of the vehicle with the cargo carrier in the down position is 7 inches. The cargo carrier will add an additional 26-1/4 inches of overall length to the vehicle. Now, the exhaust on this vehicle does exit both the passenger side and the driver's side at the rear bumper.
It is approximately 12 inches from the cargo carrier platform and sits just below the platform itself. That will do it for the Curt 20x60 folding aluminum cargo carrier for 2-inch hitches, part number C18100 on our 2012 Ford Explorer. .
Ещё видео!